Rio Rancho, NM (Enero 8, 2019) - Lectrosonics is pleased to announce the release of the ALP690, a high-performance UHF LPDA (log periodic dipole array) antenna with built-in RF amplifier, for use with wireless microphone receivers or base station transmitters in location and studio production. The new antenna design delivers +4 dBd of passive gain in a directional pattern to extend operating range, and an RF amplifier can be engaged to supply gain for overcoming signal loss in long may panlahat na ehe cable runs.
The ALP690 antenna is powered by DC bias inserted on the may panlahat na ehe cable connected to the 50 ohm BNC jack. This power can be supplied by a Lugar Series receiver, an active multicoupler or an inline BIAS-T. When no bias is applied, the ALP690 automatically switches via relays to function as a passive antenna, so that the antenna can be used for receivers as well as IFB or IEM transmission applications.
RF amplifier gain, filter bandwidth and display brightness are adjusted with a membrane switch keypad and LED display on the control panel. RF gain is adjustable in 1 dB steps from -6 dB to +12 dB to match the RF loss depending on the type and length of suyuin cable in use. When used as an active antenna, the filter bandwidth is adjustable from 470 MHz at the lower end to either 608 or 700 MHz at the top end, to serve users’ needs in various markets and locations. Vertical orientation provides a wide horizontal coverage pattern.
The antenna is formed with copper traces on a .133 inch or 3.4 mm thick glass epoxy high-pressure thermoset plastic laminate material with a durable finish. The skeletal structure reduces wind loading in outdoor use.
Specifications for the ALP690 include: +7 dBi (isotropic), +4 dBd (over dipole) passive gain. The RF passband (passive) covers 450-850 MHz, while the active filtered passband covers 470 – 700 MHz or 470 – 608 MHz, selectable. The RF amplifier gain range is -6 to +12 dB in 1 dB steps. The third order intercept is +27 dBm at the input and +41 dBm at the output. The ALP690 weight is 13 oz. or 355 grams. Power Requirements: DC bias on center pin of may panlahat na ehe cable; 8V to 16V DC; 1.5 W max.; polarity protected.
The ALP690 is available now at a MSRP of $925.00.
Mahusay na iginagalang sa loob ng mga teknikal na komunidad ng pelikula, broadcast, at teatro mula noong 1971, ang mga sistema ng wireless mikropono ng Lectrosonics at mga produkto sa pagpoproseso ng audio ay ginagamit araw-araw sa mga mission-critical na application ng mga audio engineer na pamilyar sa dedikasyon ng kumpanya sa kalidad, serbisyo sa customer, at makabagong ideya. Ang Lectrosonics ay isang tagagawa ng US na nakabase sa Rio Rancho, New Mexico. Bisitahin ang kumpanya sa online sa Www.lectrosonics.com.
Pinakabagong mga post sa pamamagitan ng msmediainc (tingnan lahat)
- Lectrosonics Releases the ALP690 High Performance UHF LPDA Antenna with Built-in RF Amplifier - Enero 8, 2019
- Ipinakikilala ng Lectrosonics ang RPS4 Universal DC Power Supply gamit ang Mga Ulat ng Internal Module ng Supply - Septiyembre 4, 2018
- Ang Mga Pelikulang Nadus ay naglalakbay sa Matigas na Lupain ng Mundo na may Lectrosonics para sa kanilang Socially Conscious Films - August 29, 2018